Superior Gecko - Page 8

Check the drain valve
Check that the drain valve is fully closed before
aempng to ll the hot tub.
Aaching cover lier (Addional Extra)
Once the hot tub is in its nal posion, we
recommend aaching your cover lier before you
ll your hot tub, to ensure enough clearance for the
lier mechanism to operate freely. Do not place too
close to nearby walls. All cover liers have dierent
clearance parameters.
Access in cabinet power supply
If the hot tub is a plug and play (13amp) hot tub, the
power cable will already be in place and therefore
no extra work is required. If the hot tub is a 32amp
(hard wired), this will require a cable wire to be
connected. If you would prefer for the cable to be
hidden, it may need to be drilled into one of the
corners or the base. This will need to be completed
by a professional.
Hot Tub prior to lling
Hot Tub equipment access
Please see step by step stages on how to remove
the cabinet panel to gain access to plumbing
locaon, electrical cabling conduit access to
power control box.
PREPARATION
| 15