Superior Gecko - Page 9

Check the drain valve
Check that the drain valve is fully closed before
aempng to ll the swim spa.
Check pump connecon and release valves
Prior to lling your swim spa, remove the side
panels where the engine compartment and control
equipment are situated. Ensure all your pump
connecons are ght and release valves are
open as they may have shied during transit.
Swim Spa prior to lling
Swim Spa equipment access
Please see step by step stages on how to remove
the cabinet panel to gain access to plumbing
locaon, electrical cabling conduit access to
power control box.
PREPARATION
| 17
Aaching a swim tether (Addional Extra)
Simply place the tether pole into the hole (the hole
will be already built into the swim spa). Once in place,
screw the pole into the hole, ensuring it is ghtly
placed and there is no room for movement.