Please read the following recommended instructions carefully to avoid the risk of your physical
injury before the product is operated.
- Check the receiver's operation voltage : AC90-250V, 50/60Hz.
- Do not cover the receiver and keep a clear space around the receiver for sufficient ventilation.
- Keep a liquid away from the receiver.
- The receiver shall not be exposed to dripping or splashing and the objects that filled with
liquids such as vases shall not be placed on the receiver.
- Unplug the receiver from the wall outlet before cleaning.
- Use a soft cloth and a mild solution of washing-up liquid to clean the casing.
- Do not block the receiver's ventilation slots which are provided for ventilation and
protection against overheating.
Maintain the receiver in the free airflow
.
-Do not allow the receiver to be exposed to the hot, cold or humid condition.
- Do not use any cable and attachment that is not recommended as that may damage
your receiver.
- Unplug the receiver from the wall outlet and disconnect the cable between the
receiver and antenna when you will not use it for a long time.
- The wall outlet shall be placed near the receiver and shall be easily accessible
- Do not remove the cover to reduce the risk of electric shock.
1
- Do not attempt to service the receiver for yourself.
- Refer to a qualified service personnel for all technical supports.
To Next Page
Loading...