Chapter 4: AMI BIOS
4-55
ASPM
This feature congures the ASPM (Active State Power Management)
settings for the graphics devices installed on PCI-E Slot 0, Slot 1, or
Slot2. The options are Disabled, L0s, L1, L0sL1, and Auto.
L1 Substates
Select to congure the L1 Substates. The options are Disabled, L1.1,
L1.2, and L1.1 & L1.2.
PCIe Speed
Set this option to congure the speed setting of this PCIE slot . The
options are Auto, Gen1, Gen2, and Gen3.
PCH LAN Controller
Use this feature to enable or disable the PCH LAN Controller. The op-
tions are Enabled and Disabled.
HD Audio
Use this feature to detect an HD Audio device. The options are Dis-
abled, Enabled, and Auto.
Wake on LAN Enable
Select Enabled to enable the capability to 'wake-up' the system
through the Ethernet port. The options are Enabled and Disabled.
Pcie PII SSC
Use this feature PCIE PII SSC. Select Auto to keep the hardware default
with no BIOS override. Valid range is from 0.0% to 2.0%.
To Next Page
Loading...
