Supermicro C7Z170-OCE - Debug Interface

4-8
Supermicro C7Z170-OCE Motherboard User’s Manual
Alias Check Request
Use this feature to set up Alias Check Request. The options are Enabled
and Disabled.
DPR Memory Size
Use this feature to set the DMA Protected Range (DPR) memory size.
Select a value.
Reset AUX Content
Use this feature to reset the TPM Auxiliary content. The options are yes
and no.
BIOS Guard
Select Enable to activate BIOS Guard. The options are Enabled and
Disabled.
Flash Wear Out Protection
Select Enable to activate Flash Wear Out Protection. The options are
Disabled and Enabled.
Current Debug Interface Status
Select Enable to activate display of the Current Debug Interface Status.
The options are Enabled and Disabled.
Debug Interface
Select Enable to activate Debug Interface. The options are Disabled
and Enabled.
Debug Interface Lock
Select Enable to activate Debug Interface lock. The options are Disabled
and Enabled.
Processor trace memory allocation
Disable of select a value for Processor Trace memory region size. The
options are Disabled, 4KB, 8KB, 16KB, 32KB, 64KB, 128KB, 256KB,
512KB, and 1MB.
FCLK Frequency for Early Power On
Select the FCLK frequency for early power on. The options are Normal
(800MHz), 1GHz, and 400MHz.