Supermicro C7Z170-OCE - Onboard Indicators

2-34
Supermicro C7Z170-OCE Motherboard User’s Manual
JBR1
S5S10
S6
S9S7
SP1
48
B1
JBT1
JSTBY1
JD1
OC_FRONT_PANEL
JF1
1
2
1516
JSD1
FAN5
FAN1
FAN4
FAN2
FAN3
S8
S11
JTPM1
1
1
13
LED2
A
JPW2
JL2
JI2C2
JI2C1
JSPDIF_OUT
JL1
LED4
MH12
MH11
MH10
JVR1
JPL2
JLED1
JPAC1
JPL1
JWD1
JPME2
C7Z170-OCE
REV:1.00
BIOS
LICENSE
MAC CODE
BAR CODE
LAN2
0/1
PCIE M.2 CONNECTOR
USB10(3.1)
LED PWR NIC
LED HDD
OH/FF
1
RST
X
ON
PWR
USB8/9(3.0)
USB6/7(3.0)
LAN1
I-SATA4
I-SATA5
BIOS Restore
CLEAR CMOS
KB/MOUSE USB
USB2/3
USB4/5
USB11/12(3.1)
I-SATA1
I-SATA3
I-SATA2
DIMMB2
DIMMB1
DIMMA2
DIMMA1
HDMI/DP/SPDIF
PCH SLOT1 PCI-E 3.0 X1 (IN X4)
CPU SLOT2 PCI-E 3.0 X16
PCH SLOT3 PCI-E 3.0 X1 (IN X4)
CPU SLOT4 PCI-E 3.0 X8 (IN X16)
CPU SLOT6 PCI-E 3.0 X16
CPU FAN
AUDIO FP
HD AUDIO
JF1
ALWAYS POPULATE GREEN SOCKET FIRST
UNB NON-ECC DDR4 DIMM REQUIRED
COM1
DVI
LED1
S12
I-SATA0
JPW1
DESIGNED IN USA
CPU Socket LGA1151
PCH
Z170
2
NIC
A. LAN LEDs
B. PWR LED
A
B
LAN LEDs
One LAN port is located on the I/O back
panel of the motherboard. This Ethernet
LAN port has two LEDs (Light Emitting
Diode). The yellow LED indicates activ-
ity, while the Link LED may be green,
amber, or off to indicate the speed of
the connections. See the tables on the
right for more information.
2-9 Onboard Indicators
LAN
Activity LED
Link LED
Onboard PWR LED Indicator
LED Status
Status Denition
Off System Off
On System on, or
System off and PWR
Cable Connected
Onboard Power LED
An Onboard Power LED is located at
LED1 on the motherboard. When LED1
is on, the AC power cable is connected.
Make sure to disconnect the power cable
before removing or installing any compo-
nent. See the layout below for the LED
location.
GLAN Link Indicator
LED Settings
LED Color Denition
Off No Connection/10 Mbps/100
Mbps
Amber 1 Gbps
Green 10 Gbps
GLAN Activity Indicator
LED Settings
Color Status Denition
Yellow Flashing Active