Supermicro C7Z170-OCE - Motherboard Installation in Chassis

2-12
Supermicro C7Z170-OCE Motherboard User’s Manual
JBR1
S5S10
S6
S9S7
SP1
48
B1
JBT1
JSTBY1
JD1
OC_FRONT_PANEL
JF1
1
2
1516
JSD1
FAN5
FAN1
FAN4
FAN2
FAN3
S8
S11
JTPM1
1
1
13
LED2
A
JPW2
JL2
JI2C2
JI2C1
JSPDIF_OUT
JL1
LED4
MH12
MH11
MH10
JVR1
JPL2
JLED1
JPAC1
JPL1
JWD1
JPME2
C7Z170-OCE
REV:1.00
BIOS
LICENSE
MAC CODE
BAR CODE
LAN2
0/1
PCIE M.2 CONNECTOR
USB10(3.1)
LED PWR NIC
LED HDD
OH/FF
1
RST
X
ON
PWR
USB8/9(3.0)
USB6/7(3.0)
LAN1
I-SATA4
I-SATA5
BIOS Restore
CLEAR CMOS
KB/MOUSE USB
USB2/3
USB4/5
USB11/12(3.1)
I-SATA1
I-SATA3
I-SATA2
DIMMB2
DIMMB1
DIMMA2
DIMMA1
HDMI/DP/SPDIF
PCH SLOT1 PCI-E 3.0 X1 (IN X4)
CPU SLOT2 PCI-E 3.0 X16
PCH SLOT3 PCI-E 3.0 X1 (IN X4)
CPU SLOT4 PCI-E 3.0 X8 (IN X16)
CPU SLOT6 PCI-E 3.0 X16
CPU FAN
AUDIO FP
HD AUDIO
JF1
ALWAYS POPULATE GREEN SOCKET FIRST
UNB NON-ECC DDR4 DIMM REQUIRED
COM1
DVI
LED1
S12
I-SATA0
JPW1
DESIGNED IN USA
CPU Socket LGA1151
PCH
Z170
2
NIC
Location of Mounting Holes
Attention! 1) To avoid damaging the motherboard and its compo-
nents, please do not use a force greater than 8 lb/inch on each mount-
ing screw during motherboard installation. 2) Some components are
very close to the mounting holes. Please take precautionary measures
to avoid damaging these components when installing the motherboard
to the chassis.
2-5 Motherboard Installation
All motherboards have standard mounting holes to t different types of
chassis. Make sure that the locations of all the mounting holes for both
motherboard and chassis match. Although a chassis may have both plas-
tic and metal mounting fasteners, metal ones are highly recommended
because they ground the motherboard to the chassis. Make sure that the
metal standoffs click in or are screwed in tightly. Then use a screwdriver
to secure the motherboard onto the motherboard tray.
Philips Screwdriver
(1)
Standoffs (9)
Only if Needed
Philips Screws (9)
Tools Needed