Supermicro C7Z170-OCE - Manufacturing Mode; Watch Dog

2-32
Supermicro C7Z170-OCE Motherboard User’s Manual
Watch Dog
JWD1 controls the Watch Dog function.
Watch Dog is a monitor that can reboot
the system when a software application
hangs. Jumping pins 1-2 will cause Watch
Dog to reset the system if an application
hangs. Jumping pins 2-3 will generate
a non-maskable interrupt signal for the
application that hangs. See the table on
the right for jumper settings.
Note: When Watch Dog is enabled,
users need to write their own ap-
plication software to disable it.
JBR1
S5S10
S6
S9S7
SP1
48
B1
JBT1
JSTBY1
JD1
OC_FRONT_PANEL
JF1
1
2
1516
JSD1
FAN5
FAN1
FAN4
FAN2
FAN3
S8
S11
JTPM1
1
1
13
LED2
A
JPW2
JL2
JI2C2
JI2C1
JSPDIF_OUT
JL1
LED4
MH12
MH11
MH10
JVR1
JPL2
JLED1
JPAC1
JPL1
JWD1
JPME2
C7Z170-OCE
REV:1.00
BIOS
LICENSE
MAC CODE
BAR CODE
LAN2
0/1
PCIE M.2 CONNECTOR
USB10(3.1)
LED PWR NIC
LED HDD
OH/FF
1
RST
X
ON
PWR
USB8/9(3.0)
USB6/7(3.0)
LAN1
I-SATA4
I-SATA5
BIOS Restore
CLEAR CMOS
KB/MOUSE USB
USB2/3
USB4/5
USB11/12(3.1)
I-SATA1
I-SATA3
I-SATA2
DIMMB2
DIMMB1
DIMMA2
DIMMA1
HDMI/DP/SPDIF
PCH SLOT1 PCI-E 3.0 X1 (IN X4)
CPU SLOT2 PCI-E 3.0 X16
PCH SLOT3 PCI-E 3.0 X1 (IN X4)
CPU SLOT4 PCI-E 3.0 X8 (IN X16)
CPU SLOT6 PCI-E 3.0 X16
CPU FAN
AUDIO FP
HD AUDIO
JF1
ALWAYS POPULATE GREEN SOCKET FIRST
UNB NON-ECC DDR4 DIMM REQUIRED
COM1
DVI
LED1
S12
I-SATA0
JPW1
DESIGNED IN USA
CPU Socket LGA1151
PCH
Z170
2
NIC
B
A
Manufacturing Mode
Close Pin 2 and Pin 3 of jumper JPME2
to bypass SPI ash security and force
the system to operate in Manufactur-
ing Mode, allowing the user to ash the
system rmware from a host server for
system setting modications. See the
table on the right for jumper settings.
Manufacturing Mode
Jumper Settings
Pin# Denition
1-2 Normal (Default)
2-3 Manufacture Mode
A. Manufacturing Mode
B. Watch Dog
Watch Dog
Jumper Settings
Pin# Denition
1-2 Reset
2-3 NMI
Open Disabled