Supermicro C7Z170-OCE - Page 25

Chapter 1: Introduction
1-11
Connector Description
Audio FP Front Panel Audio Header
B1 Onboard Battery
COM1 COM1 Port Header
DVI Digital Video Interface
Fan 1,2,3,4,5 System/CPU Fan Headers (Fan1: CPU Fan)
HD Audio High Denition Audio Connector
HDMI/DP High Denition Multimedia Interface/DisplayPort
I-SATA0~5 (Intel Z170) Serial ATA (SATA 3.0) Ports 0~5 (6Gb/sec)
JD1 Speaker/buzzer (Pins 1~3: External Speaker, Pins 3~4: Buzzer)
JF1 Front Panel Control Header
JL1 Chassis Intrusion Header
JLED1 Power LED Indicator Header
JPW1 24-pin ATX Main Power Connector (Required)
JPW2 +12V 8-pin CPU Power Connector (Required)
JSD1 SATA DOM (Disk On Module) Power Connector
JSPDIF_OUT Sony/Philips Digital Interface (S/PDIF) Out Header
JSTBY1 5V Standby Power Header
JTPM1 Trusted Platform Module/Port80 Connector
KB/Mouse Keyboard/Mouse Connector
LAN1/LAN2 Gb LAN (RJ45) Ports
M.2 PCI-E M.2 Connector
MH10 ~ MH12 M.2 Mounting Holes
OC FRONT PANEL Header for the Overclocking Control Panel
S5, S6, S7 Overclocking Button OC1 (15%), OC2 (20-25%), OC3 (User Dened
in BIOS)
S9, S10 Home Button, Memory Overclocking Button
S8, S11, S12 Clear CMOS Button, BIOS Restore, Pwer Button
SLOT1/SLOT3 PCH PCI-E 3.0 X1 (IN X4) Slots
SLOT2 CPU PCI-E 3.0 X16 Slot
SLOT4 CPU PCI-E 3.0 X8 (IN X16) Slot
SLOT6 CPU PCI-E 3.0 X16 Slot
SP1 Internal Speaker/Buzzer
USB0/1 Back panel USB 2.0 Ports
USB6/7 Back panel USB 3.0 Ports
USB10 Back panel USB 3.1 Port
USB2/3, 4/5 Front Panel Accessible USB 2.0 Headers