Supermicro C7Z170-OCE - Page 93

Chapter 4: AMI BIOS
4-25
CPU Flex Ratio Override
Select Enabled to activate CPU Flex Ratio programming. The options are
Enabled and Disabled.
CPU Flex Ratio Settings
When CPU Flex Ratio Override is enabled, this sets the value for the
CPU Flex Ratio. The default is 16.
Core Max OC Ratio
This option sets the maximum overclocking ratio for the CPU core. The
allowable range is 0-80.
System Agent Voltage (mV)
This option sets the System Agent Voltage in mV.
Core Voltage Mode
Use this feature to select the Core voltage mode. The options are Over-
ride and Adaptive.
If the feature above is set to Override, SVID and Core Voltage Override
are available for conguration.
Core Extra Turbo Voltage
Use this feature to select the Core Turbo voltage mode. Select a value.
Core Voltage Offset
Use this feature to set the CPU Voltage Offset value from -500mV to
+500mV. Enter 0 to use the manufacturer default value.
Offset Prex
Use this feature to set the Core Voltage Offset value as a positive (+)
number or a negative (-) number. The default setting is "+".
Core PLL Voltage Offset
Use this feature to set the CPU PLL Voltage Offset value from 0-63 with
each unit at 15mV. This is used to increase the range of the core frequency
in extreme overclocking conditions. Press "+" or "-" on your keyboard
to make a selection.
Ring Max OC Ratio
This option sets the maximum overclocking ratio for the RING domain.
Press "+" or "-" on your keyboard to change the value.