Super C9Z490-PG/-PGW User's Manual
112
*If the feature of Secure Boot Mode is set to Custom, the features below will become
available for conguration:
Enter Audit Mode
This submenu can only be used if current System Mode is set to User (refer to Exit Deployed
Mode). The PK variable will be erased on transition to Audit Mode.
Exit Deployed Mode
Press <Enter> button to switch between Deployment and User Mode.
Key Management
Key Management
Restore Factory Keys
This feature resets the content of all UEFI Secure Boot key databases to factory defaults.
Reset to Setup Mode
This feature deletes the contents of all UEFI Secure Boot key databases. This will result
in entering Setup Mode.
Export Secure Boot variables
This feature allows the user to copy NVRAM content of Secure boot variables to les in
a root folder on a le system device.
Enroll EFI Image
This feature allows the image to run in Secure Boot Mode. Enroll SHA256 Hash Certicate
of the image into the Authorized Signature Database.
Device Guard Ready
Remove 'UEFI CA' from DB
Use this feature to remove the Microsoft UEFI CA certicate from the database.
To Next Page
Loading...
