Supermicro C9Z490-PG - Page 116

Super C9Z490-PG/-PGW User's Manual
116
Security
Security
Hard Drive Security Frozen
Use this feature to enable BIOS security frozen command to SATA and NVME devices.
The options are Disabled and Enabled.
Password Check
Select Setup for the system to check for a password at Setup. Select Always for the system
to check for a password at bootup or upon entering the BIOS Setup utility. The options are
Setup and Always.
Administrator Password
Press <Enter> to create a new, or change an existing, Administrator password.
*If the password has been created, the feature of User Password below will become
available for conguration.
User Password
Press <Enter> to create a new, or change an existing, Administrator password.
SMC Security Erase Conguration
Note: This submenu becomes congurable when a storage device has been plugged
into the motherboard.
Information for the following is displayed:
• HDD Name
• HDD Serial Number
• Security Erase Mode
• Estimated Time
• HDD UserPwd Status
Security Function
Use this feature to set Security Function. The options are Disabled, Security Erase, and
Set Password.
Password
Enter a numeric value to set the password.