Supermicro C9Z490-PG - Page 72

Super C9Z490-PG/-PGW User's Manual
72
Power Limit 1
This feature displays the value of Power Limit 1.
Power Limit 2
This feature displays the value of Power Limit 2.
Custom Settings Nominal
CongTDP Nominal
This feature displays the value of CongTDP Nominal.
Power Limit 1
Use this feature to set the power limit 1, in milliwatts. When the limit is exceeded, the
CPU ratio is lowered after a period of time (refer to Power Limit 1 Time Window below).
A lower limit can save power and protect the CPU, while a higher limit improves perfor-
mance. This value must be between Min Power Limit TDP limit. Use the number keys
on your keyboard to enter the value. The default setting is 0.
Power Limit 2
Use this feature to set the power limit 2. Use the number keys on your keyboard to enter
the value. The default setting is 0.
Power Limit 1 Time Window
This feature determines how long the time window over which the TDP value is main-
tained. Use the number keys on your keyboard to enter the value. The default setting is
0. This value may vary between 0~128.
CongTDP Turbo Activation Ratio
Use this feature to set the custom value for Turbo Activation Ratio. The default setting
is 0. This value should be congured from LFM to Max Turbo.
Custom Settings Down
CongTDP Levels
This feature displays the level of CongTDP.
Power Limit 1
Use this feature to set the power limit 1, in milliwatts. When the limit is exceeded, the
CPU ratio is lowered after a period of time (refer to Power Limit 1 Time Window below).
A lower limit can save power and protect the CPU, while a higher limit improves perfor-
mance. This value must be between Min Power Limit TDP limit. Use the number keys
on your keyboard to enter the value. The default setting is 0.