Supermicro C9Z490-PG - Page 77

Chapter 4: UEFI BIOS
77
IMON O󰀨set
Enter a value for IMON O󰀨set. The range is 0-63999. The default is 0.
IMON Prex
Use this feature to set the prex value as a positive (+) or a negative (-). The
options are “+” and “-”.
VR Current Limit
Enter a value for the voltage regulator current limit, with each whole number equat-
ing to 1/4A (i.e., 400 = 100A). Enter 0 for Auto.
VR Voltage Limit
Enter a value (in mV) for the voltage regulator voltage limit. The range is 0-7999.
Enter 0 for Auto.
TDC Enable
This feature enables TDC. The options are Disabled and Enabled.
TDC Current Limit
Enter a value for the TDC Current Limit, with each whole number equating to 1/8A
(i.e., 1000 = 125A). The range is 0-32767. The default is 1056.
TDC Time Windows
This feature controls the TDC Time Window. The options are 1 ms, 2 ms, 3 ms,
4 ms, 5 ms, 6 ms, 7 ms, 8 ms, and 10 ms.
TDC Lock
This feature enables TDC Lock. The options are Disabled and Enabled.
GT VR Settings
GT Domain
VR Cong Enable
This feature enables VR Cong. The options are Disabled and Enabled.
AC Loading
Enter a numeric value for AC Loadline. The default is 0.
DC Loadline
Enter a numeric value for DC Loadline. The default is 0.