Supermicro C9Z490-PG - Page 78

Super C9Z490-PG/-PGW User's Manual
78
PS Current Threshold1
Enter a value for PS Current Threshold1. The range is 0-512. The default is 80.
PS Current Threshold2
Enter a value for PS Current Threshold2. The range is 0-512. The default is 20.
PS Current Threshold3
Enter a value for PS Current Threshold3. The range is 0-512. The default is 4.
PS3 Enable
This feature enables PS3. The options are Disabled and Enabled.
PS4 Enable
This feature enables PS4. The options are Disabled and Enabled.
IMON Slope
Enter a value for IMON Slope. The range is 0-200. The default is 0.
IMON O󰀨set
Enter a value for IMON O󰀨set. The range is 0-63999. The default is 0.
IMON Prex
Use this feature to set the prex value as a positive (+) or a negative (-). The
options are “+” and “-”.
VR Current Limit
Enter a value for the voltage regulator current limit, with each whole number equat-
ing to 1/4A (i.e., 400 = 100A). Enter 0 for Auto.
VR Voltage Limit
Enter a value (in mV) for the voltage regulator voltage limit. The range is 0-7999.
Enter 0 for Auto.
Intersil VR Command
This feature enables Intersil VR Command to x VR C-state issues. The options are
Disabled, Send for IA/GT rails, and Send for IA/GT/SA rails.