Supermicro C9Z490-PG - Page 90

Super C9Z490-PG/-PGW User's Manual
90
Memory Voltage
Enter a numeric value for the memory voltage override. The default is Auto.
PCH Voltage
Enter a numeric value for the PCH voltage override. The default is Auto.
CPU_IO Voltage
Enter a numeric value for the CPU IO voltage override. The default is Auto.
System Agent Voltage (mV)
Enter a numeric value for the System Agent voltage (in mV). The default is Auto.
Advanced Voltage OC Setting
Voltage Conguration
VPP Voltage
CPU PLL Voltage
PCH 1.8 Voltage
VCC DMI Voltage
Vcc_ST
Vcc_PLL
Enter a desired numeric value above for each feature. The default of these features is Auto.
Uncore
Uncore
Uncore Voltage O󰀨set
Enter a value for the o󰀨set voltage (in mV) that will be applied to the Uncore domain.
The default is 0.
Uncore Voltage O󰀨set
Use this feature to set the prex value as a positive (+) or a negative (-). The options
are “+” and “-”.