Supermicro H11DSi - Page 104

H11DSi / H11DSi-NT User's Manual
104
IPv4 PXE Support
This setting allows you to enable or disable IPv4 PXE boot support. If disabled, IPv4 PXE
boot support will not be available. The options are Disabled and Enabled.
IPv4 HTTP Support
This setting allows you to enable or disable IPv4 HTTP boot support. If disabled, IPv4 HTTP
boot support will not be available. The options are Disabled and Enabled.
IPv6 PXE Support
This setting allows you to enable or disable IPv6 PXE boot support. If disabled, IPv6 PXE
boot support will not be available. The options are Disabled and Enabled.
IPv6 HTTP Support
This setting allows you to enable or disable IPv6 HTTP boot support. If disabled, IPv6 HTTP
boot support will not be available. The options are Disabled and Enabled.
PXE boot wait time
This setting allows you to set in a number eld the wait time to press <ESC> to abort the
PXE boot. Default is 0.
Media detect count
This setting allows you set in a number eld the number of times presence of media will be
checked. Default is 1.
USB Conguration
Legacy USB Support
Select Enabled to support onboard legacy USB devices. Select Auto to disable legacy support
if there are no legacy USB devices present. Select Disable to have all USB devices available
for EFI applications only. The options include Enabled, Disabled and Auto.
XHCI Hand-off
This is a work-around solution for operating systems that do not support XHCI (Extensible
Host Controller Interface) hand-off. The XHCI ownership change should be claimed by the
XHCI driver. The options include Enabled and Disabled.
USB Mass Storage Driver Support
This setting will enable or disable support for USB mass storage drivers. The options include
Disabled and Enabled.