Appendix C: UEFI BIOS Recovery
125
1. Using a different system, copy the standard BIOS binary image le into the root directory
of a USB ash drive with FAT16 or FAT32 format and rename the le to SUPER.ROM.
Note: If you cannot locate the "SUPER.ROM" le in your driver disk, visit our website at
www.supermicro.com to download the correct BIOS image into a USB ash device and
rename it "SUPER.ROM".
2. While the system is turned off, insert the USB device that contains the new BIOS binary
image (SUPER.ROM).
3. Power on the system.
4. After the system is turned on, the system will enter the BIOS Recovery menu. Select
"Proceed with ash update" to start the BIOS recovery process. DO NOT INTERRUPT
THIS PROCESS UNTIL IT FINISHED!
To Next Page
Loading...
