Supermicro H13SAE-MF - Page 77

Chapter 4: BIOS
77
Save Changes and Exit
This setting saves changes for interface ID, DAD transmit count, policy, and data in
advanced conguration.
HTTP Boot Conguration
HTTP Boot Conguration
HTTP Boot Policy
Sets the HTTP boot policy to Apply to all LANs, Apply to each LAN, or Boot Priority #1
instantly.
HTTPS Boot Checks Hostname
Selects whether HTTPS Boot checks the hostname of TLS certicates matches the hostname
provided by the remote server. The options include Enabled and Disabled (WARNING:
Security Risk!!).
Priority of HTTP Boot
Instance of Priority 1
The default value is 1.
Select IPv4 or IPv6
Choose to set the targeted LAN port to boot from IPv4 or IPv6.
Boot Description
This setting must be lled out, otherwise the boot option for the URI cannot be created.
Boot URI
This option is an input eld used to enter a web or network address to point to the HTTP
boot les. This supports the HTTP or HTTPS protocols only.
Instance of Priority 2
Rank targeted port
Supermicro KMS Server Conguration
Supermicro KMS Server IP address
Enter IP4 address in dotted-decimal notation.
Second Supermicro KMS Server IP address
Enter IP4 address in dotted-decimal notation.