Supermicro H13SAE-MF - Page 76

76
Chapter 4: BIOS
Save Changes and Exit
This setting saves changes for interface ID, DAD transmit count, policy, and data in
advanced conguration.
MAC: 7CC2554B3119-IPv4 Network Conguration
Congured
This setting indicates whether network address congured successfully or not. The options
include Disabled and Enabled.
Save Changes and Exit
This setting saves changes and exit.
MAC: 7CC2554B3119-IPv6 Network Conguration
Enter Conguration Menu
Interface Name
Interface Type
MAC address
Host address
Route Table
Gateway addresses
DNS addresses
Interface ID
The 64-bit alternative interface ID for the device. The string is colon separated. The
default setting is 7E:C2:55:FF:FE:4B:31:19.
DAD Transmit Count
The number of consecutive neighbor solicitation messages sent while performing dupli-
cate address detection on a tentative address. A value of zero indicates that duplicate
address detection is not performed. The default value is 1.
Policy
The options are automatic and manual.