SUPER P4SPA+/P4SPE User's Manual
4-8
**If both Primary IDE and the Secondary IDE drives are populated, the Award
BIOS will assign Tertiary for the item Onboard SATA1, and Quad for the item
Onboard SATA2. (***The last option is supported by XP or the later version of
OS only.)
On-Chip Serial ATA Port0/Port1 Mode.
The feature allows you to confi gure SATA Port0/Port1 Settings. The options are
Primary Master, Primary Slave, Secondary Master, Secondary Slave, Logical
Primary, Logical Secondary, Tertiary Master, and Quaternary Master. The default
setting for On-Chip SATA Port0 is Logical Primary, and the default setting for
Port1 is Logical Secondary.
USB Controller
This setting allows you to enable or disable the USB Controller. The options are
Enabled, and Disabled.
USB 2.0 Controller
This setting allows you to enable or disable the USB 2.0 (EHCI) Controller. The
options are Enabled, and Disabled.
USB Legacy Support
This setting allows you to enable or disable the functions of USB, Keyboard/Mouse
under POST and DOS. The options are Disabled, and Enabled.
USB KB Wake-Up From S3
This setting allows you to enable or disable the function of USB KB Wake-Up
from S3. The options are Disabled, and Enabled.
AC97 Audio
Select Disable to disable the AC 97 Controller. Select Auto to allow the BIOS
select AC97 automatically. The options are Auto, and Disabled.
CPU THRM-Throttling
THRM throttling is used to lower power consumption and reduce the heat
generated by the CPU. The options for this setting are 87.5%, 75%, 62.5%,
50%, 37.5%, 25%' and 12.5%'.
To Next Page
Loading...
