10
SuperServer 5019A-FTN4 User's Manual
Figure 1-1. Control Panel View
1.4 Server Chassis Features
Control Panel
The switches and LEDs located on the control panel are described below. The control panel
is located next to the left handle of the chassis. See Chapter 4 for details on the control panel
connections.
17 6 5 4 3 2
Control Panel Features
Item Feature Description
1 Power Button
The main power button is used to apply or remove power from the power supply
but maintains standby power. To perform maintenance tasks, you must also
unplug the system before servicing.
2 Reset Button The reset button is used to reboot the system.
3 Power LED
Indicates power is being supplied to the system power supply. This LED should
normally be illuminated when the system is operating.
4 HDD LED
5 NIC1 LED
6 NIC2 LED
7 Information LED
Indicates one of multiple conditions. Refer to the following table for more
information.
To Next Page
Loading...
