Supermicro SuperServer 5019A-FTN4 - Board Connectors, Ports, and LEDs

32
SuperServer 5019A-FTN4 User's Manual
4.2 Headers and Connectors
Fan Headers
There are four 4-pin fan headers on the motherboard. Pins 1-3 are backward compatible with
traditional 3-pin fans. The onboard fan speeds are controlled by Thermal Management via
IPMI. When using Thermal Management setting, use all 3-pin fans or all 4-pin fans. Refer to

Fan Header
Pin Denitions
Pin# Denition
1 Ground (Black)
2 +12V (Red)
3 Tachometer
4 PWM_Control
Speaker
JD1 is the speaker header. Connect the cable of the external speaker to pins 1-4. Refer to

Speaker Connector
Pin Denitions
Pin Setting Denition
Pins 1-4 Speaker
General Purpose I/O Header
JGP1 is a general purpose input/ouput header via Intel PCH. Refer the table below for pin

JGP1 Header
Pin Denitions
Pin# Denition
1 +5V +5V
2 Ground Ground
3 GP0 GPP_E0
4 GP1 GPP_F1
5 GP2 GPP_E1
6 GP3 GPP_F2
7 GP4 GPP_E2
8 GP5 GPP_F3
9 GP6 GPP_F0
10 GP7 GPP_F4