Chapter 6: BIOS
79
The general BMC function and motherboard health monitor such as fan control are still
functioning even when this option is disabled.
6.6 Security
Password Check
Select Setup for the system to check for a password at Setup. Select Always for the system
to check for a password at bootup or upon entering the BIOS Setup utility. The options are
Setup and Always.
Administrator Password
Use this feature to set the administrator password which is required to enter the BIOS setup
utility. The length of the password should be from 3 characters to 20 characters long.
*The feature below is displayed if an Administrator Password is set:
User Password
Use this feature to set a user password.
Secure Boot
Platform Mode - Setup
Secure Boot - Not Active
Vendor Keys - Not Active
Enable Secure Boot
Select Enable for secure boot support to ensure system security at bootup. The options
are Disabled and Enabled.
Secure Boot Mode
This feature allows the user to select the desired secure boot mode for the system. The
options are Standard and Custom.
*If Secure Boot Mode is set to Customized, Key Management features will be available
for conguration:
Reset to Setup Mode
Select Yes to delete all Secure Boot key databases and force the system to Setup Mode.
The options are Yes and No.
Restore Factory Keys
Select Yes to restore all factory keys to the default settings. The options are Yes and No.
To Next Page
Loading...
