80
SuperServer 5019A-FTN4 User's Manual
Key Management
Provision Factory Defaults
Select Enabled to install the default Secure Boot keys set by the manufacturer. The options
are Disabled and Enabled.
Install Factory Default Keys
Select Yes to install the default settings for all keys. The options are Yes and No.
Enroll E Image
This feature allows the image to run in Secure Boot mode.
Save All Secure Boot Variables
This feature allows the user to decide if all secure boot variables should be saved.
Platform Key (PK)
Set New
Select Yes to load the new platform keys (PK) from the manufacturer's defaults. Select No
Yes and No.
Key Exchange Key (KEK)
Set New
Select Yes to load the KEK from the manufacturer's defaults. Select No to load the KEK
Append
Select Yes to add the KEK from the manufacturer's defaults list to the existing KEK. Select
Authorized Signatures
Set New
Select Yes to load the database from the manufacturer's defaults. Select No to load the
Append
Select Yes to add the database from the manufacturer's defaults to the existing DB. Select
To Next Page
Loading...
