54
SuperServer 5019A-FTN4 User's Manual
Turbo
manufacturer. The options are Disable and Enable.
*The feature above is not available when EIST (GV3) is disabled.
TM1
Select Enable to activate TM1 support for system thermal monitoring. TM1 allows the CPU to
regulate its power consumption based upon the modulation of the CPU Internal clock when
and Enable.
TM2 Mode
Use this feature to select the throttling mode for TM2. The options are LFM Throttling and
Adaptive Throttling.
*The feature above is not available when EIST (GV3) or TM1 is disabled.
Dynamic Self Refresh
Select Enable to support Dynamic Self-Refreshing for the onboard memory controller. The
options are Disable and Enable.
CPU C State
Select Eanbled to enhance the Cx state of the CPU. Reboot the system for this feature to
Enable.
Package C State limit
Use this item to set the limit on the C-State package register. The options are No Pkg C-State,
C1, and C3.
*The feature above is not available when CPU C State is disabled.
Max Core C-State
Use this feature to select the CPU C-state. The options are C1 and C6.
*The feature above is not available when CPU C State is disabled.
Enhanced Halt State (C1E)
CPU's power consumption by minimizing the CPU's clock cycles and voltage use during a
Halt State. The options are Disable and Enable.
*The feature above is not available when CPU C State is disabled.
To Next Page
Loading...
