Supermicro SuperServer 5019C-MHN2 - Page 136

136
SuperServer 5019C-MHN2 User's Manual
Note: On the other hand, if the following screen displays, please load the "Super.

inserting a USB device that contains the new "Super.ROM" image to your machine
for BIOS recovery.)
   
installed on a bootable or non-bootable USB-attached device. However, the BIOS might need


To perform UEFI BIOS recovery using a USB-attached device, follow the instructions below.
1. 󰀨
directory of a USB device or a writable CD/DVD.
Note: 
at www.supermicro.com           
rename it to "Super.ROM" for BIOS recovery use.
2. Insert the USB device that contains the new BIOS image ("Super.ROM") into your USB
drive and power on the system
3. While powering on the system, please keep pressing <Ctrl> and <Home> simultaneously
on your keyboard until the following screen (or a screen similar to the one below)
displays.
Warning: Please stop pressing the <Ctrl> and <Home> keys immediately when you see the
screen (or a similar screen) below; otherwise, it will trigger a system reboot.