31
Chapter 3: Maintenance and Component Installation
Memory Support and Installation
Note: Check the Supermicro website for recommended memory modules.
Important: Exercise extreme care when installing or removing DIMM modules to prevent
any possible damage.
Memory Support
The X11SCZ-F supports up to 64GB of DDR4 ECC/Non-ECC UDIMM with speeds of up to
2666 MHz in four memory slots. Refer to the table below for additional memory information.
Recommended Population (Balanced)
DIMMA1 DIMMB1 DIMMA2 DIMMB2 Total System Memory
4GB 4GB 8GB
4GB 4GB 4GB 4GB 16GB
8GB 8GB 16GB
8GB 8GB 8GB 8GB 32GB
16GB 16GB 32GB
16GB 16GB 16GB 16GB 64GB
To Next Page
Loading...
