Supermicro SuperServer 5019C-MHN2 - Ipmi

SuperServer 5019C-MHN2 User's Manual
98
6.5 IPMI

BMC Firmware Revision

IPMI STATUS

System Event Log
Enabling/Disabling Options
SEL Components
Select Enabled for all system event logging at bootup. The options are Disabled and
Enabled.
Erasing Settings
Erase SEL
Select Yes, On next reset to erase all system event logs upon next system reboot. Select
Yes, On every reset to erase all system event logs upon each system reboot. Select No
to keep all system event logs after each system reboot. The options are No, Yes, On next
reset, and Yes, On every reset.