8
SuperServer 5019C-MHN2 User's Manual
1.2 Unpacking the System
Inspect the box the SuperServer 5019C-MHN2 was shipped in and note if it was damaged
who delivered it.
Decide on a suitable location for the rack unit that will hold the server. It should be situated
in a clean, dust-free area that is well ventilated. Avoid areas where heat, electrical noise and
Be sure to read the precautions and considerations noted in Appendix B.
Main Parts List
Description Part Number Quantity
Air Shroud MCP-310-19007-0N 1
Hard Drive Backplane BPN-SAS3-815TQ 1
1U Passive CPU Heatsink SNK-P0049P 1
Riser Card with PCI-E x16 output RSC-RR1U-E16 1
Hot-swap 3.5" Hard Drive Trays MCP-220-00075-0B 1
4-cm Counter-rotating Fans FAN-0154L4 5
Chapter 1
Introduction
1.1 Overview
This chapter provides a brief outline of the functions and features of the 5019C-MHN2. The
5019C-MHN2 is based on the X11SCZ-F motherboard and the SC813MFTQC-350CB2
chassis.
In addition to the motherboard and chassis, several important parts that are included with
the system are listed below:
To Next Page
Loading...
