Supermicro SuperServer 5019C-MHN2 - Page 48

48
SuperServer 5019C-MHN2 User's Manual
NMI Button
The non-maskable interrupt button header is located on pins 19 and 20 of JF1. Refer to the

NMI Button
Pin Denitions (JF1)
Pins Denition
19 Control
20 Ground
Power Fail LED
The Power Fail LED connection is located on pins 5 and 6 of JF1. Refer to the table below

PWR Fail LED
Pin Denitions (JF1)
Pins Denition
5 3.3V
6 Power Fail
Power LED
The Power LED connection is located on pins 15 and 16 of JF1. Refer to the table below

Power LED
Pin Denitions (JF1)
Pins Denition
15 +3.3V Stby
16 PWR LED