Supermicro SuperServer 5019P-WT - Advanced Power Management Configuration

SuperServer 5019P-WT/WTR User's Manual
132
Appendix D: UEFI BIOS Recovery
133
Warning: Please stop pressing the <Ctrl> and <Home> keys immediately when you see the
screen (or a similar screen) below; otherwise, it will trigger a system reboot.
4. After locating the new BIOS binary image, the system will enter the BIOS Recovery
menu as shown below.
Note: At this point, you may decide if you want to start the BIOS recovery. If you decide to
proceed with BIOS recovery, follow the procedures below.
Note: 
to the root folder and connect this folder to the system. (You can do so by inserting a USB
device that contains the new "Super.ROM" image to your machine for BIOS recovery.)
             
installed on a bootable or non-bootable USB-attached device. However, the BIOS might need


To perform UEFI BIOS recovery using a USB-attached device, follow the instructions below.
1. 
directory of a USB device or a writable CD/DVD.
Note: www.
supermicro.com
ROM" for BIOS recovery use.
2. Insert the USB device that contains the new BIOS image ("Super.ROM") into your USB
drive and power on the system
3. While powering on the system, please keep pressing <Ctrl> and <Home> simultaneously
on your keyboard until the following screen (or a screen similar to the one below)
displays.