Supermicro SuperServer 5029AP-TN2 - Quick Reference Table

12
SuperServer 5029AP-TN2 User's Manual
Quick Reference Table
Jumper Description Default Setting
JBT1 CMOS Clear Open: Normal, Short: Clear CMOS
JI
2
C1/JI
2
C2 SMB to PCI-E Slots Enable/Disable Pins 1-2 (Enabled)
JPAC1 Audio Enable/Disable Pins 1-2 (Enabled)
JPL1 LAN1 Enable/Disable Pins 1-2 (Enabled)
JPL2 LAN2 Enable/Disable Pins 1-2 (Enabled)
JPME2 Manufacturer Mode Pins 1-2 (Normal)
JWD1 Watch Dog Pins 1-2 (Reset)
LED Description Status
LED1 Power LED S3 Blink Function Blinking Green: S3 function
LED2 System Power LED Solid Blue: Power On
LED3 P5V_STBY Power LED 5V Standby Power Ready
Connector Description
AUDIO FP Front Panel Audio Header
BT1 Onboard Battery
COM1 ~ COM3 COM Ports supported by Novuton 5523D (COM1: RJ45, COM1/2: RS-232, COM3: RS-485)
EDP1 Embedded DisplayPort (switch with VGA)
FAN1/FAN2 System/CPU Fan Headers (FAN1: CPU Fan)
HDMI/DP High Denition Multimedia Interface/DisplayPort
I-SATA0/I-SATA1 Intel SATA 3.0 Ports
JD1 Speaker Header
JF1 Front Panel Control Header
JGP1 General Purpose I/O Header
JL1 Chassis Intrusion Header
JMD1 M.2 PCI-E 2.0 x2 Slot / I-SATA Slot
JMP1 Mini PCI-E with mSATA
JPH1
4-pin Power Connector for HDD devices (provides power from the motherboard to system HDD
devices.)
JPW1 24-pin ATX Power Connector
JPV1 12V 4-pin Power Connector
JSD1 SATA DOM Power Connector
JSTBY1 Standby Power Header
JTPM1 Trusted Platform Module/Port 80 Connector
LAN1/LAN2 LAN (RJ45) Ports
M2_SRW2/M2_SRW3 M.2 Mounting Screws
mSATA/m-PCIE mSATA/miniPCIE Slot
M-SATA0 ~ M-SATA3 SATA Ports supported by Marvel 88SE9230
SLOT1 CPU PCI-E 2.0 x2 (In x8) Slot
SRW1/SRW2 m-PCIE Mounting Screws