30
SuperServer 5029AP-TN2 User's Manual
Chapter 3
Motherboard Connections
This section describes the connections on the A2SAV motherboard and provides pinout
denitions. Note that depending on how the system is congured, not all connections are
required. The LEDs on the motherboard are also described here. A motherboard layout
indicating component locations may be found in Chapter 1.
Please review the Safety Precautions in Appendix A before installing or removing components.
3.1 Power Connections
Main ATX Power Supply Connector
The primary power supply connector (JPW1) meets the ATX SSI EPS 24-pin specication.
ATX Power 24-pin Connector
Pin Denitions
Pin# Denition Pin# Denition
13 +3.3V 1 +3.3V
14 NC 2 +3.3V
15 Ground 3 Ground
16 PS_ON 4 +5V
17 Ground 5 Ground
18 Ground 6 +5V
19 Ground 7 Ground
20 Res (NC) 8 PWR_OK
21 +5V 9 5VSB
22 +5V 10 +12V
23 +5V 11 +12V
24 Ground 12 +3.3V