Supermicro SuperServer 5029AP-TN2 - Motherboard Components; Processor; Memory Support; Installing Memory

17
Chapter 2 Maintenance and Component Installation
2.4 Motherboard Components
Processor
The 5029AP-TN2 features an embedded Intel Atom E3940 Quad Core SoC processor.
Memory Support
The motherboard supports up to 8 GB of DDR3L Dual Non-ECC SO-DIMM of speeds up to
1866 MHz in one low-prole slot. Check the Supermicro website for a list of memory modules
that have been validated.
Installing Memory
Caution: Exercise extreme care when installing or removing DIMM modules to prevent
damage.
Installing a SO-DIMM Module into a Horizontal Socket
1. Align the receptive point on the bottom of the SO-DIMM module with the key on the
memory socket. Note the notches on the side of the SO-DIMM module and those on the
socket to avoid causing damage.
Socket Key
Receptive Point
on the Module
Memory Module Socket
SO-DIMM Memory
Module
2. Line up the bottom of the SO-DIMM memory module with the edge of the horizontal
socket.
3. Once they are lined up, push the memory module into the memory socket until the
module is securely seated.