Supermicro SuperServer 5029AP-TN2 - Ports

38
SuperServer 5029AP-TN2 User's Manual
3.3 Ports
Figure 3-2. Rear input/Output Ports
DP and HDMI Ports
One HDMI and one DisplayPort are used to display both high denition video and digital sound
through an HDMI or DP-capable display, using a single HDMI or DP cable (not included).
The A2SAV supports HDMI Specication version 1.4b and DP 1.1a via N3700 processor
graphics controller.
LAN Ports
Two LAN ports (LAN1, LAN2) are located on the I/O back panel. They accept RJ45 type
cables.
Universal Serial Bus (USB) Ports
There are two USB 2.0 ports (USB0/1) and two USB 3.0 ports (USB2/3) located on the I/O
back panel. The motherboard also has a header for two USB 2.0 ports (USB8/9). The onboard
headers can be used to provide front side USB access with a cable (not included).
Serial Ports
There is one COM port (COM1) on the I/O back panel using an RJ45 connector and two COM
headers (COM2, COM3) on the motherboard. COM2 supports RS-232 and COM3 supports
RS-485 only.
VGA Port
The VGA controller is from AST2400 mainly for BMC KVM (Keyboard/Video/Mouse) remote
control purposes.
1
98
7
6
5
4
3
2
10
Rear I/O Ports
# Description # Description
1. DisplayPort 6. USB1 Port (USB 2.0)
2. HDMI Port 7. USB0 Port (USB 2.0)
3 COM1 Port 8 LAN1 Port
4 USB2 Port (USB 3.0) 9 LAN2 Port
5. USB3 Port (USB 3.0) 10 VGA Port