Supermicro SuperServer 5029AP-TN2 - Page 23

23
Chapter 2 Maintenance and Component Installation
Figure 2-10. Installing a Hard Drive into a Drive Carrier
Figure 2-11. Installing a Drive Carrier into the Hard Drive Cage
Hard Drive Carrier
Dummy Drive
Hard Drive
Installing a Drive Carrier into the Hard Drive Cage
1. Insert the hard drive carrier into the drive bay, using the drive carrier handle to push it all
the way into the hard drive cage until it stops.
2. Close the handle until the drive carrier clicks into the locked position.
3. Close and lock the front bezel.
1