Supermicro SuperServer 6028U-TR4T+ - Page 56

5-12
SUPERSERVER 6028U-T Series User's Manual
Serverboard Quick Reference
Jumper Description Default Setting
JBT1 Clear Onboard CMOS Battery See Section 5-8
JPB1 BMC Enable Pins 1-2 (Enabled)
JPG1 VGA Enable Pins 1-2 (Enabled)
JPME2
ME Manufacturing Mode
Select
Pins 1-2 (Normal)
JPP0/JTAG SCAN CPU1 JTAG Scan Enable
Pins 1-4 (Includes CPU2, 2-3:
isolates CPU1)
JPP1/JTAG SCAN CPU2 JTAG Scan Enable
Pins 1-4 (Includes CPU1, 2-3:
isolates CPU2)
JWD1 Watch Dog Timer Enable Pins 1-2 (Reset)
Connectors Description
BP PWR1/2 Backplane power connectors
COM1 COM Port1
Fan1-8 CPU/System Fan Headers
GPU PWR1-PWR4 8-pin Power Connectors (1-4) for GPUs
JF1 Front Control Panel Header
JF2 4-pin Power Connector for LAN 3/4 LED
JL1 Chassis Intrusion Header
JIPMB1 4-pin External BMC I
2
C Header (for an IPMI card)
JSD1/JSD2 SATA DOM (Device on Module) Power Connectors
JTPM1 TPM (Trusted Platform Module)/Port 80 Header
IPMI_LAN Dedicated IPMI LAN Support (by the ASpeed controller)
PSU1/PSU2 Power Supply Unit 1/Unit 2 Headers
I-SATA0~3, 4, 5 SATA 3.0 Ports (Intel PCH)
S-SATA 0~3 SATA 3.0 Ports (Intel SCU)
SXB1A/1B/1C Proprietary PCI-E Slot used for WIO-Left Devices (supported by CPU2)
SXB2 Proprietary PCI-E 3.0x8 Slot for WIO-Right Devices or Add-on Cards
(supported by CPU2)
SXB3A/3B/3C Proprietary PCI-E Slot for Ultra Riser Devices (supported by CPU1)
I-SGPIO2 Serial Link General Purpose I/O (SGPIO) header (for S-SATA ports)
USB 0/1 (3.0) Rear USB 3.0 Ports
USB 2 (3.0) Type A USB 3.0 Header
USB 3/4 (3.0) Front Accessible USB 3.0 Headers
VGA VGA Port