Supermicro SuperServer 6028U-TR4T+ - Onboard Indicators

5-22
SUPERSERVER 6028U-T Series User's Manual
5-9 Onboard Indicators
IPMI LAN Activity Indicator
LED Settings

Amber Flashing Active
IPMI Dedicated LAN LEDs
A dedicated IPMI LAN port is located
on the rear I/O panel. The amber LED
on the right indicates activity, while the
LED on the left indicates the speed of
the connection. See the tables at right
for more information.
Onboard Power LED
An Onboard Power LED is located
at LE2 on the serverboard. When
this LED is on, the system is on. Be
󰀨
the power cord before removing or
installing components. See the tables
at right for more information.
BMC Heartbeat
LED
Status

Green:
Blinking
BMC: Normal
BMC Heartbeat LED
A BMC Heartbeat LED is located at
BMC_HB_LED1. When this LED is
blinking, BMC is functioning normally.
IPMI LAN Speed LED

󰀨 10 Mbps, or No Connection
Green 100 Mbps
Amber 1 Gbps
HDD Heartbeat LED
An HDD heartbeat LED is located next
to the JF1 header. When this green
LED is blinking, HDD devices are
functioning normally. See the table at
right for more information.
HDD Heartbeat LED
States

Green:
Blinking
HDD: Normal
Onboard PWR LED Indicator
LED States

󰀨 󰀨
not connected)
Green System On
Green:
Flashing
Quickly
ACPI S1 State