1-3
Chapter 1: Introduction
1-3 Server Chassis Features
The 6028U-T Series is built upon the SC829UAC-R1K02 chassis or the SC829UAC4-
R1K02 for NVMe models. Details and related procedures can be found in Chapter
6.The following is a general outline of the main features of the chassis.
System Power
The chassis features a redundant 1 KW power supply consisting of two hot-plug
Hard Drives
The chassis supports up to twelve 3.5" hot-swap hard drives.
PCI Expansion Slots
All 6028U-T Series models include two WIO riser cards that support PCI-Express 3.0
In addition, each system comes with an Ultra riser card to provide added features
such as LAN ports and additional PCI expansion slots.
System Ultra Riser Card Ultra Riser Additional PCI-E 3.0 Support
6028U-TR4+ AOC-2UR68-i4G
One PCI-E x8 (Supermicro SAS only)
One PCI-E x8 (in x16 slot)
One PCI-E x16
6028U-TRT+ AOC-2UR68-i2XT
6028U-TRTP+ AOC-2UR68-i2XS
6028U-TR4T+ AOC-2UR6-i4XT
One PCI-E x8 (Supermicro SAS only)
One PCI-E x16
6028U-TNRT+ AOC-2UR8N4-i2XT
One PCI-E x8 (Supermicro SAS only)
One PCI-E x8 (in x16 slot)
6028U-TNR4T+ AOC-2URN4-i4XT One PCI-E x8 (Supermicro SAS only)
Front Control Panel
The chassis front control panel provides system monitoring and power control.
Status LEDs indicate system power, HDD activity, network activity, UID, and
overheat and fan failure.
Cooling System
The chassis has an innovative cooling design that features four 8-cm high-
performance fans. Fan speed can be determined by system temperature via IPMI.
Each power supply module also includes a cooling fan.
To Next Page
Loading...
