62
SuperServer E300-9D User's Manual
Ipv6 HTTP Support
Select Enabled to enable IPv6 HTTP boot support. The options are Disabled and Enabled.
PXE boot Wait Time
Use this option to specify the wait time to press the ESC key to abort the PXE boot. Press
"+" or "-" on your keyboard to change the value. The default setting is 0.
Media detect count
Use this option to specify the number of times media will be checked. Press "+" or "-" on
your keyboard to change the value. The default setting is 1.
Super IO Conguration
Super IO Chip AST2500
Serial Port 1 Conguration
Serial Port 1
Enabled and Disabled. Enable this feature for the next two features to display and only
Device Settings
This feature displays the base I/O port address and the Interrupt Request address of a
Change Settings
Port 1. Select Auto for the BIOS to automatically assign the base I/O and IRQ address to
Auto, (IO=3F8h; IRQ=4), (IO=3F8h; IRQ=3, 4, 5,
6, 7, 9, 10, 11, 12), (IO=2F8h; IRQ=3, 4, 5, 6, 7, 9, 10, 11, 12); (IO=3E8h; IRQ=3, 4, 5, 6,
7, 9, 10, 11, 12), and (IO=2E8h; IRQ=3, 4, 5, 6, 7, 9, 10, 11, 12).
Serial Port 2 Conguration
Serial Port 2
Enabled and Disabled. Enable this feature for the next two features to display and only
Device Settings
This feature displays the base I/O port address and the Interrupt Request address of a
To Next Page
Loading...
