Chapter 5: BIOS
73
5.5 IPMI
BMC Firmware Revision
IPMI STATUS
System Event Log
Enabling/Disabling Options
SEL Components
Select Enabled for all system event logging at bootup. The options are Disabled and
Enabled.
Erasing Settings
Erase SEL
Select Yes, On next reset to erase all system event logs upon next system reboot. Select
Yes, On every reset to erase all system event logs upon each system reboot. Select No to
keep all system event logs after each system reboot. The options are No, "Yes, On next
reset," and "Yes, On every reset."
To Next Page
Loading...
