EasyManua.ls Logo

Supermicro SuperServer E300-9D - Page 69

Supermicro SuperServer E300-9D
109 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Chapter 5: BIOS
69
Current Status Information
This feature displays the status of the TPM support on this motherboard.
TPM Enabled Status
TPM Active Status
TPM Owner Status
SMCI BIOS-Based TPM Provision Support
Use feature to enable the Supermicro TPM Provision support. The options are Disabled and
Enabled.
TXT Support
Intel TXT (Trusted Execution Technology) helps protect against software-based attacks and

this feature to enable or disable TXT Support. The options are Disabled and Enabled.
*The following features are displayed if a TPM 2.0 module is detected:
TPM20 Device Found
Vendor: IFX
Firmware Version: 7.62
Security Device Support
        
security devices will be enabled for TPM support to enhance data integrity and network
security. Please reboot the system for a change on this setting to take effect. The options
are Disable and Enable.
The following TPM information will be displayed:
Active PCR banks
Available PCR banks
*If the feature "Security Device Support" is enabled, the following features are available
for conguration:
SHA256 PCR Bank

for the installed TPM device. The options are Disabled and Enabled.
Pending Operation
Use this feature to schedule a TPM-related operation to be performed by a security device
for system data integrity. Your system will reboot to carry out a pending TPM operation. The
options are None and TPM Clear.

Related product manuals