82
SuperServer E302-9A User's Manual
6.6 Security
Password Check
Select Setup for the system to check for a password at Setup. Select Always for the system
to check for a password at bootup or upon entering the BIOS Setup utility. The options are
Setup and Always.
Administrator Password
Use this feature to set the administrator password which is required to enter the BIOS setup
utility. The length of the password should be from 3 characters to 20 characters long.
*The feature below is displayed if an Administrator Password is set:
User Password
Use this feature to set a user password.
Secure Boot
Platform Mode - Setup
Secure Boot - Not Active
Vendor Keys - Not Active
Enable Secure Boot
Select Enable for secure boot support to ensure system security at bootup. The options
are Disabled and Enabled.
To Next Page
Loading...