20
SuperServer E302-9A User's Manual
Figure 2-1. Installing the Mounting Bracket
2.3 Mounting on a Wall
The chassis can be mounted on a wall using a bracket (optional, MCP-290-30201-0B).
1. Secure the bracket to the wall where you want the server to be mounted by using four
screws through the holes around the center of the bracket, as shown below.
2. Flip the tab of the latch on the top of the chassis bracket to unlock the latch, then slide
the latch upward.
Chassis Bracket Latch
Locking Tab of Chassis Bracket Latch
Bracket Screws
Figure 2-2. Chassis Bracket Latch
To Next Page
Loading...