10
SuperWorkstation 7049GP-TRT User's Manual
Control Panel Features
Item Feature Description
1 Power Button
The main power switch is used to apply or remove power from the
removes the main power but maintains standby power. To perform
many maintenance tasks, you must unplug system before servicing.
2 Reset Button The reset button is used to reboot the system.
3 HDD LED
4 NIC LED
5 Information LED Alerts operator of several states. See table below for details.
6 Power Fail Indicates a power failure to the system's power supply units.
7 USB3.0 Two USB 3.0 ports.
8 Line out Line out port.
9 Mic Mic port.
Information LED
Status Description
Continuously on and red
An overheat condition has occurred.
(This may be caused by cable congestion.)
Blinking red (1 Hz) Fan failure, check for an inoperative fan.
Blinking red (0.25 Hz) Power failure, check for a non-operational power supply.
Solid blue
Local UID has been activated. Use this function to locate the server in
a rack mount environment.
Blinking blue
Remote UID is on. Use this function to identify the server from a
remote location.
To Next Page
Loading...
Need help?
General
