1-6
X10DRG-O(T)+-CPU/X10DRG-O-PCIE User’s Manual
X10DRG-O+-CPU/X10DRG-OT+-CPU Jumpers
Jumper
Description Default Setting
JBT1 Clear CMOS See Chapter 2
JPB1 BMC Enable Pins 1-2 (Enabled)
JPG1 VGA Enable Pins 1-2 (Enabled)
JPL1 GLAN1/GLAN2 Enable Pins 1-2 (Enabled)
JPME2 Manufacturer (ME) Mode Select Pins 1-2 (Normal)
JWD1 Watch-Dog Timer Enable Pins 1-2 (Reset)
X10DRG-O+-CPU/X10DRG-OT+-CPU Connectors
Connectors Description
Battery (JBT1) Onboard CMOS battery (See Chpt. 3 for used battery dis-
posal)
COM1 Backpanel COM Port 1 for front access
FAN1-FAN8 CPU/system cooling fan headers (Fans 1-8)
JF1 Front_Panel_Control header
J31/J32, J33/J34 PCI-E Slots (J31/J32: supported by CPU1), (J33/J34: sup-
ported by CPU2)
JL1 Chassis intrusion header
SP1 Onboard speaker header
JPW21/22/23/24 SMCI-proprietary main power connectors
JPW3-7, JPW12-18 12V 8-pin power connectors (JPW17/JPW18: white power
connectors used for BPD HDDs only.)
JSD1/JSD2 Power connector SATA DOM
JTPM1 TPM (Trusted Platform Module)/Port 80 header
LAN1/LAN2 G-bit Ethernet (GLAN) ports 1/2
IPMI_LAN IPMI_dedicated LAN support by the Aspeed controller
SP1 Internal buzzer/speaker
(I-)SATA 0-3 Intel® SATA 3.0 connectors (0-3) from Intel® PCH
(I-)SATA 4/5 Intel® SATA SuperDOM connectors (I-SATA4/5) from
Intel® PCH
(S)-SATA0-3 SATA connectors (0-3) from Intel® SCU
I-SGPIO1/2 Serial_Link General-Purpose I/O (SGPIO) headers for I-
SATA connections (I-SGPIO1 for I-SATA0-3, I-SGPIO2 for
I-SATA4/5)
S-SGPIO Serial_Link General-Purpose I/O (SGPIO) headers for S-
SATA connections (S-SATA0-3) supported by Intel® SCU
SW1 UID (Unit Identifi er switch)
(FP) USB 0/1 USB 2.0 connections 0/1 for front access
To Next Page
Loading...
