Supermicro X10DRL-CT - HDD LED;UID Switch; NIC1;NIC2 LED Indicators

2-22
X10DRL-CT/-iT/-C Motherboard User’s Manual
B
NIC1/NIC2 LED Indicators
The NIC (Network Interface Control-
ler) LED connection for LAN port 1 is
located on pins 11 and 12 of JF1, and
the LED connection for LAN Port 2 is
on Pins 9 and 10. Attach the NIC LED
cables here to display network activity.
Refer to the table on the right for pin
denitions.
HDD LED/UID Switch
The HDD LED/UID Switch connection
is located on pins 13 and 14 of JF1.
Attach a cable to Pin 14 to show HDD
activity status. Attach a cable to Pin 13
to use UID switch. See the table on
the right for pin denitions.
HDD LED/UID Switch
Pin Denitions (JF1)
Pin# Denition
13 UID Switch
14 HD Active
C
A. HDD LED/UID Switch
B. NIC1 LED
C. NIC2 LED
A
GLAN1/2 LED
Pin Denitions (JF1)
Pin# Denition
9 NIC 2 Activity LED
10 NIC 2 Link LED
11 NIC 1 Activity LED
12 NIC 1 Link LED
Power Button
OH/Fan Fail/
PWR Fail LED)
1
NIC1 Link LED
Reset Button
2
Power Fail LED
HDD LED
FP PWRLED
Reset
PWR
3.3 V
UID Switch
UID LED
Ground
Ground
1920
3.3V
X
Ground
NMI
X
NIC2 Link LED
NIC2 Activity LED
NIC1 Activity LED