Supermicro X10DRL-CT - Onboard LED Indicators; LAN1;2;3;4, IPMI LAN Leds

Chapter 2: Installation
2-37
D
C
A. LAN1 LEDs
B. LAN2 LEDs
LAN1/2/3/4, IPMI LAN LEDs
Four LAN ports (LAN1, LAN2, LAN3*, LAN4*), and IPMI Dedicated LAN are located
on the I/O back panel of the motherboard. The LAN ports are supported by the
onboard Intel LAN controller, and IPMI LAN is supported by the BMC. Each Ethernet
LAN port has two LEDs. The Amber LED indicates activity, while the other Link
LED may be green, amber or off to indicate the speed of the connections. See
the tables at right for more information.
Note: LAN3 and LAN4 are supported on the X10DRL-CT/-iT only.
LAN Link
LED Status
LED Color Denition
Off 10 Mbps, or No Connection
Green 100 Mbps
Amber 1 Gbps
IPMI_LAN Link LED (Left) &
Activity LED (Right)
Color Status Denition
Link (Left) Green:
Solid
100 Mbps
Amber:
Solid
1 Gbps
Activity
(Right)
Orange:
Blinking
Active
A
B
LAN 1/LAN 2
IPMI LAN
(X8ST3-F)
Link LED
Activity LED
IPMI_LAN
2-9 Onboard LED Indicators
E
C. LAN3 LEDs*
D. LAN4 LEDs*
E. IPMI LEDs
10G-LAN Link
LED Status (X10DRL-CT/iT)
LED Color Denition
Off 10 or 100 Mbps, or No
Connection
Green 10 Gbps
Amber 1 Gbps
LAN 1/LAN 2
IPMI LAN
(X8ST3-F)
Activity LED
LAN1~LAN4
Link LED
LAN 1/LAN 2
IPMI LAN
(X8ST3-F)
LAN 1/LAN 2
IPMI LAN
(X8ST3-F)
LAN 1/LAN 2
IPMI LAN
(X8ST3-F)
Rear View (when facing the rear
of the chassis.