Supermicro X10DRL-CT - Motherboard Features

Chapter 1: Overview
1-7
Motherboard Features
CPU
• Dual Intel
®
E5-2600V3 Series Processors (Socket R3-
LGA 2011); each processor supports dual full-width
Intel QuickPath Interconnect (QPI) links (of up to 9.6
GT/s one direction per QPI)
Memory
• Integrated memory controller supports: Up to 512 GB
of DDR4 (288-pin) Registered (RDIMM)/Load Reduced
(LRDIMM) ECC 2133/1866/1600 MHz in 8 slots
Note 1: Memory speed support depends on the
CPUs installed in the system.
Note 2: For the latest CPU/memory updates,
please refer to our website at http://www.super-
micro.com/products/motherboard.
DIMM sizes
• DIMM 4GB, 8GB,16GB, 32GB, 64GB, DR/
RDIMM or QR/LRDIMM @ 1.2V
Chipset
• Intel® PCH C612
Expansion
• One (1) PCI Express 3.0 x8 slot (CPU1 Slot6),
• One (1) PCI-Express 3.0 x16 slot (CPU1 Slot5),
• One (1) PCI-Express 3.0 x8 slot (CPU2 Slot4)
Slots
Graphics
• Graphics Controller via Aspeed 2400 BMC
Network
• Dual Intel i210 Gigabit (10/100/1000 Mb/s) single-port
Ethernet controllers for LAN 1/LAN 2 ports
• Dual 10GBase-T LAN with Intel X540 Ethernet control-
lers for LAN 3/LAN 4 ports (X10DRL-CT/-iT only)
• Aspeed 2400 Base-board Controller (BMC) supports
IPMI_LAN 2.0
I/O Devices
SATA Connections
• SATA Ports Six (6) SATA 3.0 Ports supported
by Intel PCH (I-SATA 0-5),
RAID 0, 1, 5, 10
• SAS Ports Eight (8) SAS 3.0 Ports supported
by LSI SCU (L-SAS 0-7, X10DRL-
CT/-C only)
RAID 0, 1, 5, 6, 10, 50, 60
IPMI 2.0
• IPMI 2.0 supported by Aspeed 2400